The product is a self-adhesive waterproofing material which is constructed by wet-applied method and directly bonded with cement mortar mixture. With the addition of unique activator and soaking agent in the gum, the creep property of the gum is increased on the basis of maintaining the advantages of the traditional self-adhesive rubber, so that it can infiltrate into the pore and capillary of concrete to form physical adsorption and mortise-tenon effect. It also produces chemical reaction with concrete or cement gel to form a chemical cross-linking structure, so that the coil is firmly bonded with the base layer, forming a sealed and sealed waterproof layer.
The wet-applied method achieves full micro-bonding between coil and base through flowing cement sand, achieves close bonding with base and high bonding strength, eliminates water-channeling layer, and establishes a stable waterproof system.
Thickness |
3.0mm |
Length |
10m |
Width |
1m |
Certificate |
ISO9001/14001/45001 |
Physical Property
![High Quality Asphalt Felt Roofing Underlayment Waterproofing Bitumen Waterproof Membrane Bituminous Membrane](//www.micstatic.com/athena/img/transparent.png)
Applicable Range
Waterproofing works of basement, roof, etc.
Construction Method
- Wet-applied method:
Plain cement slurry is evenly applied on the base, which is used for bonding transition between the base and the self-adhesive surface of the coil. After removing the isolation film of the self-adhesive surface of the coil, it is directly bonded with the transition bonding layer. In vertical construction, a certain amount of special glue can be added to the cement slurry to increase the viscosity of the cement slurry.
- Construction process:
Clean up the substrate →moisture the substrate → locate and snapping →plastering cement slurry →pave waterproof membrane →flapping the upper surface of coil and pulping →airing membrane for 24hrs to 48hrs →repair and acceptance.
- Notes:
Do not pave membrane in rainy, snowy or windy weather.
During construction, it is necessary to ensure the cleanliness of surface at the overlap.
When construction at low temperature, hot air should be used to assist the construction of the overlapping part.
Packaging & Shipping
Port: |
Tianjin Xingang Port |
Shipping: |
Support Sea freight |