This is a non-exposed applied self-adhesive waterproof membrane without reinforcement, made of self-adhesive polymer modified bitumen glue.
Thickness |
1.2mm / 1.5mm / 2.0mm |
Length |
15m / 20m |
Width |
1m |
Certificate |
ISO9001/14001/45001 |
Physical Property
Applicable Range
Building roof, underground and tunnel waterproofing project,especially for project where no hot work is allowed; the double sides is suitable for auxiliary waterproof projects.
Construction Method
According to the specific conditions of the project, you can choose the adhesion method or wet-applied method. The adhesion method is suitable for base surface drying projects; the wet paving method can be used without water.
- Adhesion method:
On the dry, flat and dust-free base layer, first brush the base treatment agent. After drying, remove the isolation film from the self-adhesive surface of the coil, and then bond directly with the substrate.
- Wet-applied method:
Plain cement slurry is evenly applied on the base, which is used for bonding transition between the base and the self-adhesive surface of the coil. After removing the isolation film of the self-adhesive surface of the coil, it is directly bonded with the transition bonding layer. In vertical construction, a certain amount of special glue can be added to the cement slurry to increase the viscosity of the cement slurry.
Packaging & Shipping
Port: |
Tianjin Xingang Port |
Shipping: |
Support Sea freight |